Results for “inc”
Results in Online Store
CF 6769-350
CategoryDriveshafts
SubategoryStock Replacement Driveshafts
Part #CF 6769-350
UPC00887753252319
UseCamaro
Description3 inch aluminum shaft, stock length, includes transmission yoke.
ApplicationsCF6769 Camaro with TH350 transmission.
SY-727-7290
CategoryYokes
SubategoryOEM Transmission Yokes
Part #SY-727-7290
UPC00887753253521
UseMopar 727 29 on 30 Spline 7290 Trans. Yoke U-J Inside C Clips
DescriptionMopar 727 29 on 30 Spline 7290 Trans. Yoke U-J Inside C Clips. Seal Surface is 1.680 Inches Spline is 29 Based on 30 7.55 U-J C/L to End of Spline
ApplicationsMopar 727 29 on 30 Spline 7290 Trans. Yoke U-J Inside C Clips
ALU-1330
CategoryDriveshafts
SubategoryCustom Aluminum Driveshafts
Part #ALU-1330
UPC00887753252159
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Supplied transmission yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1330 4 in. Diameter Aluminum Driveshaft with Customer Supplied Trans. Yoke
SY-904-1330
CategoryYokes
SubategoryOEM Transmission Yokes
Part #SY-904-1330
UPC00887753252845
UseMopar 904 1330 Trans Yoke. U-J 3.625 Across; Cap 1.062
DescriptionMopar 904 1330 Trans Yoke. U-J 3.625 Across; Cap 1.062. Seal Surface is 1.56 Inches Spline is 25 6.00 U-J C/L to End of Spline 1330 Series
ApplicationsMopar 904 1330 Trans Yoke. U-J 3.625 Across; Cap 1.062, Generic Photo
SK-35-30-95CRC
CategoryDriveshafts
SubategoryCustom Steel Driveshafts
Part #SK-35-30-95CRC
UPC00887753253248
UseOver 500 HP can carry SFI sticker
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
ApplicationsCUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/TRANS YOKE
SY-C6-1310
CategoryYokes
SubategoryOEM Transmission Yokes
Part #SY-C6-1310
UPC00887753253583
UseC-6, Tremec 500, 600, T56, T5 1310 U-J 3.465 Across; Cap 1.062
DescriptionC-6, Tremec 500, 600, T56, T5 1310 U-J 3.465 Across; Cap 1.062. Seal Surface is 1.390 Inches Spline is 31 6.00 U-J C/L to End of Spline
ApplicationsC-6, Tremec 500, 600, T56, T5 1310 U-J 3.465 Across; Cap 1.062, Generic Photo
Site-wide results
Our Distinction
Inland Empire Drive Line Service
What do haute couture and drive lines have in common? Well, haute couture (“high sewing”) is characterized as being made to order for a specific customer from high-quality materials with extreme attention to detail and finish. Plain and simple, there is no better description of the driveline products produced by Inland Empire Drive Line Service.It was a long journey from the beginning (1981) to their current status as the foremost manufacturer of high performance drive shaft (32 years), but because from the very beginning the focus was always on high quality standards and equally high customer...
Customer Comments
Mooneyes at '21 Bonneville
Chico, congratulations on your 247.199 Exit Speed in the ’27 Roadster!Thank you for choosing IEDLS for your car’s driveshaft.
Stock Replacement Driveshafts
Stock Replacement
Driveshafts deliver power, consuming some of it in the process. A new aluminum driveshaft from Inland Empire Drive Line Service will reduce this power loss and run smoother than the mass production, aging original driveshaft. The driveshafts listed here are complete, balanced and ready to install. They consist of 3 inch diameter (except where otherwise noted).125 wall auminum tube, aluminum weld yokes, steel u-joints and a transmission yoke. They are intended to be direct replacements for the stock steel driveshafts in cars up to 500 horse power using street tires on the street. Whether you...
Magazine Tech Articles
How to replace U-Joints & Balance Your Truck’s Driveshaft
Project Over/Under, 2003 Chevy Silverado: Part 10Click to view article
Policies
Warranty Returns
Customers may submit products that are deemed to be defective in material and workmanship.Prior to returning any defective product the customer must request and receive a Returned Goods Authorization (RGA) from Inland Empire Drive Line Service, Inc. The defective product must be shipped freight prepaid.When the product is received it will be analyzed and a final disposition will be name, Products that are deemed to be defective by Inland Empire Drive Line Service, Inc. and are within the warranty time period will receive a full or partial credit for the value of the part only depending on completeness...
Yokes
Steel Pinion Yokes
Our 1350 Forged Steel Pinion Yokes are precision machined for a perfect fit and forged and heat treated for maximum strength. These U-Bolt style yokes are specifically designed for Spicer 1350 use: Ford 9”, Ford 9” Pro Pears, Ford 8.8”, Mopar 8.75, GM 10 bolt, GM 12 bolt and Dana 60.
Custom Aluminum Driveshafts
Aluminum Driveshafts
Our custom Aluminum Driveshafts are manufactured from custom drawn 6061-T6 D.O.M. aluminum tubes for consistent strength utilizing 6061-T6 aluminum forged weld yokes for strengthened grain structure. Internal stress induced by the machining process is reduced by working with the grain structure resulting in a more durable product. This reliability is enhanced by our "State of the art" welding processes. Our products have passed Spicer's grueling dynamic reverse torsion testing and have qualified us as an authorized aluminum shaft builder.
Our Difference
High Impact Center Support Bearings
Our XS series center support bearings were developed especially for high torque induced vibrations that happen upon start up and when hauling heavy loads or pulling a heavy trailer. These are High-impact, polyurethane-cushioned driveshaft center support bearings . This innovative product has more than 10 years of proven experience and is warranted for one full year. We carry a large supply for stock vehicles and are available for a wide variety of cars, trucks, utility vehicles including "duallys" and especially for the 1958 to 1964 Chevrolet. View the links on the sidebar to learn more about...
Our Past Present and Future
38 Years Industry Experience!
Inland Empire Driveline Service began in 1981 as a conventional drive shaft repair shop serving the Ontario, California auto repair and heavy trucking industries. As with any business, getting started wasn't easy! But, because of our high standards for quality work and prompt delivery we developed early recognition for our services. In less than two years we were building on a production basis for several well known motor home manufacturers. This manufacturing base, combined with our growing service clientele enabled us to expand our facilities in Ontario and open a location in Corona, California...