Driveshafts
Custom Aluminum Driveshafts
ALU-1310KP
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1310KP
UPC00887753252142
UseThe Show Stopper
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1310 3 in. aluminum driveshaft w/transmission yoke Polished with Chrome u-joints. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. use with up to 500 hp with street tires.
Price$985.34
Add to Cart
Array
(
[id] => 71
[application] => The Show Stopper
[category] => 1
[model_options] => 0
[part_number] => ALU-1310KP
[price] => 985.34
[price_backup] => 914.64
[subcategory] => 1
[weight] => 25
[orderNum] => 70
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1310 3 in. aluminum driveshaft w/transmission yoke Polished with Chrome u-joints. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. use with up to 500 hp with street tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252142
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952418
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1330-3.5C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1330-3.5C
UPC00887753252173
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1330 in. 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
Price$599.61
Add to Cart
Array
(
[id] => 72
[application] => 500 HP and Lower
[category] => 1
[model_options] => 0
[part_number] => ALU-1330-3.5C
[price] => 599.61
[price_backup] => 551.05
[subcategory] => 1
[weight] => 25
[orderNum] => 72
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1330 in. 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252173
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952617
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1330-C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1330-C
UPC00887753252180
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1330 in. 4 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
Price$637.85
Add to Cart
Array
(
[id] => 73
[application] => 500 HP and Lower
[category] => 1
[model_options] => 0
[part_number] => ALU-1330-C
[price] => 637.85
[price_backup] => 587.10
[subcategory] => 1
[weight] => 25
[orderNum] => 73
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1330 in. 4 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252180
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952651
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350C
UPC00887753252234
UseOver 500 HP can carry SFI sticker
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsCustom 1350 in. 3.5 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
Price$599.61
Add to Cart
Array
(
[id] => 74
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] => 0
[part_number] => ALU-1350C
[price] => 599.61
[price_backup] => 556.04
[subcategory] => 1
[weight] => 25
[orderNum] => 74
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1350 in. 3.5 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252234
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952685
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-4-C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-4-C
UPC00887753252210
UseOver 500 HP can carry SFI sticker
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsCustom 1350 in. 4 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
Price$610.54
Add to Cart
Array
(
[id] => 75
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] => 0
[part_number] => ALU-1350-4-C
[price] => 610.54
[price_backup] => 561.35
[subcategory] => 1
[weight] => 25
[orderNum] => 75
[iedls_part_number] =>
[photos] => [{"photo":"images/3_5 aluminum.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1350 in. 4 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252210
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1679952782
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1310-C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1310-C
UPC00887753252135
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1310 3 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
Price$473.95
Add to Cart
Array
(
[id] => 76
[application] => 500 HP and Lower
[category] => 1
[model_options] => 0
[part_number] => ALU-1310-C
[price] => 473.95
[price_backup] => 432.60
[subcategory] => 1
[weight] => 25
[orderNum] => 69
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1310 3 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252135
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952461
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1310-3.5C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1310-3.5C
UPC00887753600387
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1310 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
Price$525.30
Add to Cart
Array
(
[id] => 77
[application] => 500 HP and Lower
[category] => 1
[model_options] => 0
[part_number] => ALU-1310-3.5C
[price] => 525.30
[price_backup] => 481.01
[subcategory] => 1
[weight] => 25
[orderNum] => 71
[iedls_part_number] =>
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1310 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753600387
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952518
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350KP
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350KP
UPC00887753252265
UseOver 500 HP can carry SFI sticker
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
Applications1350 3.5" POLISHED SHAFT WITH CHROME PLATED U-JOINTS.
Price$1129.58
Add to Cart
Array
(
[id] => 238
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] => 0
[part_number] => ALU-1350KP
[price] => 1129.58
[price_backup] => 1050.60
[subcategory] => 1
[weight] => 20
[orderNum] => 234
[iedls_part_number] => ALU-1350KP
[photos] => [{"photo":"images/aluminum shaft.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => 1350 3.5" POLISHED SHAFT WITH CHROME PLATED U-JOINTS.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252265
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1679952740
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
MP-05
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #MP-05
UPC00887753252906
Use2005-2010 Mustang GT
DescriptionThis is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.
Applications2005-2010 Ford Mustang GT V8
Price$792.23
Add to Cart
Array
(
[id] => 265
[application] => 2005-2010 Mustang GT
[category] => 1
[model_options] => 0
[part_number] => MP-05
[price] => 792.23
[price_backup] => 746.75
[subcategory] => 1
[weight] => 21
[orderNum] => 262
[iedls_part_number] =>
[photos] => [{"photo":"products/img_265.jpg"}]
[custom_one_piece] => 0
[custom_two_piece] => 0
[a] =>
[applications] => 2005-2010 Ford Mustang GT V8
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252906
[d-2] =>
[description] => This is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1643053063
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
MP-04
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #MP-04
UPC00887753252890
Use2005-2010 V-6
DescriptionThis is a single piece Aluminum shaft to replace the stock shaft. No adapter is required.
ApplicationsFord Mustang 2005-2010 V6
Price$792.23
Add to Cart
Array
(
[id] => 266
[application] => 2005-2010 V-6
[category] => 1
[model_options] => 0
[part_number] => MP-04
[price] => 792.23
[price_backup] => 746.75
[subcategory] => 1
[weight] => 21
[orderNum] => 261
[iedls_part_number] => MP-04
[photos] => [{"photo":"products/img_266.jpg"}]
[custom_one_piece] => 0
[custom_two_piece] => 0
[a] =>
[applications] => Ford Mustang 2005-2010 V6
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252890
[d-2] =>
[description] => This is a single piece Aluminum shaft to replace the stock shaft. No adapter is required.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1643053126
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
MP-06
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #MP-06
UPC00887753252913
Use2005-2010 V8 GT500
DescriptionThis is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.
ApplicationsFord Mustang GT 500 V8 2005-2010
Price$792.23
Add to Cart
Array
(
[id] => 272
[application] => 2005-2010 V8 GT500
[category] => 1
[model_options] => 0
[part_number] => MP-06
[price] => 792.23
[price_backup] => 746.75
[subcategory] => 1
[weight] => 41
[orderNum] => 268
[iedls_part_number] =>
[photos] => [{"photo":"products/img_272.jpg"}]
[custom_one_piece] => 0
[custom_two_piece] => 0
[a] =>
[applications] => Ford Mustang GT 500 V8 2005-2010
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252913
[d-2] =>
[description] => This is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1643053938
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350
UPC00887753252197
UseOVER 500 HP can carry SFI sticker
DescriptionCustom 1350 3.5 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsThis shaft uses customer's transmission yoke.
Price$539.81
Add to Cart
Array
(
[id] => 294
[application] => OVER 500 HP can carry SFI sticker
[category] => 1
[model_options] =>
[part_number] => ALU-1350
[price] => 539.81
[price_backup] => 508.82
[subcategory] => 1
[weight] => 17
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 0
[custom_two_piece] => 0
[a] =>
[applications] => This shaft uses customer's transmission yoke.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252197
[d-2] =>
[description] => Custom 1350 3.5 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1643147801
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-4
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-4
UPC00887753252210
UseOver 500 HP can carry SFI sticker
DescriptionCustom 1350 4 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsThis shaft uses Customer's transmission yoke.
Price$579.58
Add to Cart
Array
(
[id] => 295
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] =>
[part_number] => ALU-1350-4
[price] => 579.58
[price_backup] => 546.31
[subcategory] => 1
[weight] => 15
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => This shaft uses Customer's transmission yoke.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252210
[d-2] =>
[description] => Custom 1350 4 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1643147990
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-4QC
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-4QC
UPC00887753252197
UseOver 500 HP can carry SFI sticker
DescriptionCustom 1350 4 In. Aluminum Driveshaft W/ Forged Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsCUSTOM 1350 4in. ALUMINUM WITH CHROMOLY TRANS. YOKE
Price$0.00
Add to Cart
Array
(
[id] => 296
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] =>
[part_number] => ALU-1350-4QC
[price] => 0.00
[price_backup] => 0.00
[subcategory] => 1
[weight] => 20
[orderNum] =>
[iedls_part_number] =>
[photos] => [{"photo":"images/1350 Shaft QC.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => CUSTOM 1350 4in. ALUMINUM WITH CHROMOLY TRANS. YOKE
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252197
[d-2] =>
[description] => Custom 1350 4 In. Aluminum Driveshaft W/ Forged Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1472830196
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
IED-ALU-3R35C
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #IED-ALU-3R35C
UPC00887753252654
Use500 HP and Lower
DescriptionCustom 3.5 In. Aluminum 3R Driveshaft W/3R Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for Up to 500 HP with Street Tires
ApplicationsGM 3R Series u-joints with inside clip rings.
Price$556.97
Add to Cart
Array
(
[id] => 297
[application] => 500 HP and Lower
[category] => 1
[model_options] =>
[part_number] => IED-ALU-3R35C
[price] => 556.97
[price_backup] => 0.00
[subcategory] => 1
[weight] => 15
[orderNum] =>
[iedls_part_number] =>
[photos] => [{"photo":"images/products/img_15.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => GM 3R Series u-joints with inside clip rings.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252654
[d-2] =>
[description] => Custom 3.5 In. Aluminum 3R Driveshaft W/3R Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for Up to 500 HP with Street Tires
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 3R
[lastChange] => 1549577137
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
IED-ALUCAMARO135
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #IED-ALUCAMARO135
UPC00887753252647
UseOVER 500 HP
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsCustom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
Price$653.32
Add to Cart
Array
(
[id] => 298
[application] => OVER 500 HP
[category] => 1
[model_options] =>
[part_number] => IED-ALUCAMARO135
[price] => 653.32
[price_backup] => 653.32
[subcategory] => 1
[weight] => 17
[orderNum] =>
[iedls_part_number] =>
[photos] => [{"photo":"images/products/img_21.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252647
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1472318486
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1310
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1310
UPC00887753252616
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Cutomer Suppliedt Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1310 Aluminum 3 Inch Driveshaft with Customer Supplied Transmission Yoke
Price$409.78
Add to Cart
Array
(
[id] => 311
[application] => 500 HP and Lower
[category] => 1
[model_options] =>
[part_number] => ALU-1310
[price] => 409.78
[price_backup] => 0.00
[subcategory] => 1
[weight] => 13
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1310 Aluminum 3 Inch Driveshaft with Customer Supplied Transmission Yoke
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252616
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Cutomer Suppliedt Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1310
[lastChange] => 1643148889
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-4X5
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-4X5
UPC00887753252272
Use5in. Diameter custom aluminum shaft
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 or 1330 5 In. Aluminum Driveshaft Customer Supplied Transmission Yoke Can Be Up to 70 Inches Long U-Joint C/L to C/L. Use 1330 Up to 500 HP with Tires and 1350 Above Above 500 HP with Any Tires.
Applications5in. Diameter custom aluminum shaft
Price$698.91
Add to Cart
Array
(
[id] => 318
[application] => 5in. Diameter custom aluminum shaft
[category] => 1
[model_options] =>
[part_number] => ALU-4X5
[price] => 698.91
[price_backup] => 658.79
[subcategory] => 1
[weight] => 22
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => 5in. Diameter custom aluminum shaft
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252272
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 or 1330 5 In. Aluminum Driveshaft Customer Supplied Transmission Yoke Can Be Up to 70 Inches Long U-Joint C/L to C/L. Use 1330 Up to 500 HP with Tires and 1350 Above Above 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1330 or 1350
[lastChange] => 1643149053
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1330
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1330
UPC00887753252159
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Supplied transmission yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1330 4 in. Diameter Aluminum Driveshaft with Customer Supplied Trans. Yoke
Price$573.91
Add to Cart
Array
(
[id] => 327
[application] => 500 HP and Lower
[category] => 1
[model_options] =>
[part_number] => ALU-1330
[price] => 573.91
[price_backup] => 540.96
[subcategory] => 1
[weight] => 16
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1330 4 in. Diameter Aluminum Driveshaft with Customer Supplied Trans. Yoke
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252159
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Supplied transmission yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1330
[lastChange] => 1643149307
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1330-3.5
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1330-3.5
UPC00887753252166
Use500 HP and Lower
DescriptionCustom 1330 3.5 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1330 3.5 in. Diameter Aluminum Shaft with Customer Supplied Transmission Yoke.
Price$539.81
Add to Cart
Array
(
[id] => 328
[application] => 500 HP and Lower
[category] => 1
[model_options] =>
[part_number] => ALU-1330-3.5
[price] => 539.81
[price_backup] => 508.82
[subcategory] => 1
[weight] => 15
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1330 3.5 in. Diameter Aluminum Shaft with Customer Supplied Transmission Yoke.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252166
[d-2] =>
[description] => Custom 1330 3.5 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1330
[lastChange] => 1643149404
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-QCS
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-QCS
UPC00887753252258
UseOver 500 HP can carry SFI sticker
DescriptionCustom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
ApplicationsCustom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
Price$628.30
Add to Cart
Array
(
[id] => 330
[application] => Over 500 HP can carry SFI sticker
[category] => 1
[model_options] =>
[part_number] => ALU-1350-QCS
[price] => 628.30
[price_backup] => 628.30
[subcategory] => 1
[weight] => 20
[orderNum] =>
[iedls_part_number] =>
[photos] => [{"photo":"images/1350 Shaft QC.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252258
[d-2] =>
[description] => Custom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1472830265
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1310-3.5
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1310-3.5
UPC00887753252623
Use500 HP and Lower
DescriptionThis Shaft is Hand Made to Order Using the Customer's Transmission Yoke. It is Built Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer's Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
ApplicationsCustom 1310 3.5 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
Price$457.35
Add to Cart
Array
(
[id] => 331
[application] => 500 HP and Lower
[category] => 1
[model_options] =>
[part_number] => ALU-1310-3.5
[price] => 457.35
[price_backup] => 471.27
[subcategory] => 1
[weight] => 16
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => Custom 1310 3.5 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252623
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Customer's Transmission Yoke. It is Built Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer's Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1310
[lastChange] => 1643667099
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-4
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-4
UPC00887753252203
UseOVER 500 HP
DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
Applications1350 Series, 4" diameter with Customer Supplied Trans. Yoke
Price$579.58
Add to Cart
Array
(
[id] => 335
[application] => OVER 500 HP
[category] => 1
[model_options] =>
[part_number] => ALU-1350-4
[price] => 579.58
[price_backup] => 546.31
[subcategory] => 1
[weight] => 15
[orderNum] =>
[iedls_part_number] =>
[photos] => []
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => 1350 Series, 4" diameter with Customer Supplied Trans. Yoke
[centerline_to_end] =>
[d] =>
[d-1] => 00887753252203
[d-2] =>
[description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] => 1350
[lastChange] => 1643149701
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)
ALU-1350-SLIP-3P
CategoryDriveshafts
SubcategoryCustom Aluminum Driveshafts
Part #ALU-1350-SLIP-3P
UPC00887753600394
UseThe use of the TR6060 and 6L80E
DescriptionThis is 3 1/2" diameter 1350 Aluminum Driveshaft, is Custom Made to Your Specifications (Measurements Needed). Not to Exceed 60" Center to Center of U-Joints. (If Needed Made Longer Please Call). The Driveshaft is Made for the Use of the TR6060 and 6L80E. 3Prong Transmissions Fixed Yoke. The Driveshaft Has Slip Built into it to Allow for Movement.
ApplicationsThe use of the TR6060 and 6L80E
Price$1495.87
Add to Cart
Array
(
[id] => 345
[application] => The use of the TR6060 and 6L80E
[category] => 1
[model_options] =>
[part_number] => ALU-1350-SLIP-3P
[price] => 1495.87
[price_backup] => 1410.00
[subcategory] => 1
[weight] => 18
[orderNum] =>
[iedls_part_number] =>
[photos] => [{"photo":"ALU-1350-SLIP-3P.jpg"}]
[custom_one_piece] => 1
[custom_two_piece] => 0
[a] =>
[applications] => The use of the TR6060 and 6L80E
[centerline_to_end] =>
[d] =>
[d-1] => 00887753600394
[d-2] =>
[description] => This is 3 1/2" diameter 1350 Aluminum Driveshaft, is Custom Made to Your Specifications (Measurements Needed). Not to Exceed 60" Center to Center of U-Joints. (If Needed Made Longer Please Call). The Driveshaft is Made for the Use of the TR6060 and 6L80E. 3Prong Transmissions Fixed Yoke. The Driveshaft Has Slip Built into it to Allow for Movement.
[e] =>
[e-1] =>
[e-2] =>
[ground_hub_diameter] =>
[major_spline_diameter] =>
[spine_count] =>
[u-joint_series] =>
[lastChange] => 1643150611
[lastChangeUser] => 88
[categoryName] => Driveshafts
[subcategoryName] => Custom Aluminum Driveshafts
)