Driveshafts
Custom Steel Driveshafts

SK-31-31-83C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-31-31-83C

UPC00887753253194

Use500 HP and lower. Complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires

ApplicationsCustom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires

Price$405.26
Add to Cart
Array
(
    [id] => 22
    [application] => 500 HP and lower. Complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-31-31-83C
    [price] => 405.26
    [price_backup] => 393.46
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 20
    [iedls_part_number] => SK-31-31-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253194
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1549402704
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-83C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-83C

UPC00887753253224

UseOver 500 HP Complete with Trans. Yoke, can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$434.97
Add to Cart
Array
(
    [id] => 23
    [application] => Over 500 HP Complete with Trans. Yoke, can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-83C
    [price] => 434.97
    [price_backup] => 422.30
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 24
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253224
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1549402666
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-95C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95C

UPC00887753253248

UseOver 500 HP Complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$504.23
Add to Cart
Array
(
    [id] => 24
    [application] => Over 500 HP Complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-95C
    [price] => 504.23
    [price_backup] => 470.71
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 25
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253248
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1549402774
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-83CRC

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-83CRC

UPC00887753253255

UseOver 500 HP compete with Trans. Yoke can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$648.90
Add to Cart
Array
(
    [id] => 25
    [application] => Over 500 HP compete with Trans. Yoke can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-83CRC
    [price] => 648.90
    [price_backup] => 630.00
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 26
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253255
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1549402920
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-83C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-83C

UPC00887753253279

UseOver 500 HP complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke

Applications1350 3.5" custom 3.5in. 1350 .083 wall Steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires .

Price$464.67
Add to Cart
Array
(
    [id] => 27
    [application] => Over 500 HP complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-83C
    [price] => 464.67
    [price_backup] => 451.14
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 30
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" custom 3.5in. 1350 .083 wall Steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires .
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253279
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1549402989
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-65C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-65C

UPC00887753253262

UseOver 500 HP complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .065 Wall Steel Driveshaft with Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. for More Than 500 HP with Any Tires

Applications1350 3.5" custom 3.5 in. 1350 .065 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires

Price$483.27
Add to Cart
Array
(
    [id] => 28
    [application] => Over 500 HP complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-65C
    [price] => 483.27
    [price_backup] => 451.14
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 31
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" custom 3.5 in. 1350 .065 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253262
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .065 Wall Steel Driveshaft with Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1549403232
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

58-64 LR

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #58-64 LR

UPC00887753252104

Use500 HP and Lower 58-64 Chevy

DescriptionThis "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.

Applications58-64 Chevy and 58 to 72 Chevy and GMC Trucks

Price$668.37
Add to Cart
Array
(
    [id] => 31
    [application] => 500 HP and Lower 58-64 Chevy 
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64 LR
    [price] => 668.37
    [price_backup] => 648.90
    [subcategory] => 2
    [weight] => 50
    [orderNum] => 231
    [iedls_part_number] => 
    [photos] => [{"photo":"images/complete replacement.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => 58-64 Chevy and 58 to 72 Chevy and GMC Trucks
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252104
    [d-2] => 
    [description] => This "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1591204706
    [lastChangeUser] => 60
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IE 502

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IE 502

UPC00887753252432

UseOver 500 HP 58 - 64 Chevy

DescriptionThis Custom 1350 3.0 In. Diameter Shaft Set for 58-64 Chevrolets is Used with More Than 500 HP and Any Tires. It Features Our Polyurethane Center Support and Telescoping Rear Shaft. It Arrives Fully Assembled, Balanced and Ready to Install.

ApplicationsThese shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks. This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-6 Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.

Price$791.09
Add to Cart
Array
(
    [id] => 32
    [application] => Over 500 HP 58 - 64 Chevy
    [category] => 1
    [model_options] => 0
    [part_number] => IE 502
    [price] => 791.09
    [price_backup] => 768.05
    [subcategory] => 2
    [weight] => 60
    [orderNum] => 232
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom shaft.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => These shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks.  This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-6 Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252432
    [d-2] => 
    [description] => This Custom 1350 3.0 In. Diameter Shaft Set for 58-64 Chevrolets is Used with More Than 500 HP and Any Tires. It Features Our Polyurethane Center Support and Telescoping Rear Shaft. It Arrives Fully Assembled, Balanced and Ready to Install.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1627078085
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

58-64 RSNB

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #58-64 RSNB

UPC00887753252609

UseRear Shaft

DescriptionAn "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It Should be used with 7075-T6 Aluminum Bearing Support. This shaft is included with our 58 - 64 RS kit. The Rear Shaft kit can be special ordered for trucks.

Price$313.67
Add to Cart
Array
(
    [id] => 33
    [application] => Rear Shaft 
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64 RSNB
    [price] => 313.67
    [price_backup] => 304.53
    [subcategory] => 2
    [weight] => 23
    [orderNum] => 233
    [iedls_part_number] => 
    [photos] => [{"photo":"images/58-64 chevy.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252609
    [d-2] => 
    [description] => An "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It Should be used with 7075-T6 Aluminum Bearing Support. 
This shaft is included with our 58 - 64 RS kit.
The Rear Shaft kit can be special ordered for trucks.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1549403875
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-33-35-83C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-33-35-83C

UPC00887753253217

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 3.5 in. 1330 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.

Price$442.90
Add to Cart
Array
(
    [id] => 235
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => SK-33-35-83C
    [price] => 442.90
    [price_backup] => 442.90
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 23
    [iedls_part_number] => SK-33-35-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3.5 in. 1330 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires. 

    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253217
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires. 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1472243439
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-31-35-83C

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-31-35-83C

UPC00887753253200

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 3.5 in. 1310 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.

Price$427.14
Add to Cart
Array
(
    [id] => 236
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => SK-31-35-83C
    [price] => 427.14
    [price_backup] => 427.14
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 22
    [iedls_part_number] => SK-31-35-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3.5 in. 1310 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires. 

    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253200
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires. 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1472243498
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-83CRC

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-83CRC

UPC00887753252807

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Chrome Moly Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Applications1350 3.5" Chromoly custom 3.5in. .083 wall 1350 3.5" Chromoly steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. for more than 500 hp with any tires .

Price$710.00
Add to Cart
Array
(
    [id] => 237
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-83CRC
    [price] => 710.00
    [price_backup] => 710.00
    [subcategory] => 2
    [weight] => 35
    [orderNum] => 230
    [iedls_part_number] => SK-35-35-83CRC
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" Chromoly 

custom 3.5in. .083 wall 1350 3.5" Chromoly steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. for more than 500 hp with any tires .

    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252807
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Chrome Moly Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires. 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1472931137
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-MP-08

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-08

Use2005-2010 V8 GT

DescriptionThis is a Steel one piece Shaft 3.5" diameter to replace heavy two piece shaft

ApplicationsFord Mustang GT V8 2005-2010

Price$695.25
Add to Cart
Array
(
    [id] => 270
    [application] => 2005-2010 V8 GT
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-08
    [price] => 695.25
    [price_backup] => 695.25
    [subcategory] => 2
    [weight] => 41
    [orderNum] => 266
    [iedls_part_number] => 
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT V8 2005-2010
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This is a Steel one piece Shaft 3.5" diameter to replace heavy two piece shaft
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1466966976
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-MP-07

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-07

Use2005-2010 GT500

DescriptionThis is a 3.5" Steel Shaft to replace the heavy two piece shaft.

ApplicationsFord Mustang GT500 2005-2010 V8

Price$695.25
Add to Cart
Array
(
    [id] => 271
    [application] => 2005-2010 GT500
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-07
    [price] => 695.25
    [price_backup] => 695.25
    [subcategory] => 2
    [weight] => 41
    [orderNum] => 267
    [iedls_part_number] => 
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT500 2005-2010 V8
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This is a 3.5" Steel Shaft to replace the heavy two piece shaft.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1466967055
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-MP-04

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-04

UPC00887753253378

UseAll V-6 Mustangs

DescriptionThis is a single piece Steel shaft to replace the stock steel shaft. No adapter is required.

ApplicationsFord Mustang 2005-2006 V6

Price$715.85
Add to Cart
Array
(
    [id] => 274
    [application] => All V-6 Mustangs
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-04
    [price] => 715.85
    [price_backup] => 715.85
    [subcategory] => 2
    [weight] => 21
    [orderNum] => 269
    [iedls_part_number] => MP-04
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang 2005-2006 V6
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253378
    [d-2] => 
    [description] => This is a single piece Steel shaft to replace the stock steel shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1472146833
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-95CRC

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95CRC

UPC00887753253248

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/TRANS YOKE

Price$630.00
Add to Cart
Array
(
    [id] => 323
    [application] => Over 500 HP  can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => SK-35-30-95CRC
    [price] => 630.00
    [price_backup] => 630.00
    [subcategory] => 2
    [weight] => 24
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => CUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/TRANS YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253248
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1473000437
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK-31-20-SLI

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK-31-20-SLI

UPC00887753252784

Use1310 2 " slip shaft

DescriptionThis 2 Inch Diameter Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission End U-Joint. The Assembly is Balanced and Shipped Ready to Install.

Applications1310 2" Slip Shaft Built To Length. Note that maximum length is dependant on RPM.

Price$334.76
Add to Cart
Array
(
    [id] => 339
    [application] => 1310 2 " slip shaft 
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK-31-20-SLI
    [price] => 334.76
    [price_backup] => 334.76
    [subcategory] => 2
    [weight] => 16
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/58-64 chevy.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1310 2" Slip Shaft Built To Length. 
Note that maximum length is dependant on RPM.

    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252784
    [d-2] => 
    [description] => This 2 Inch Diameter Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission End U-Joint. The Assembly is Balanced and Shipped Ready to Install.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1473002155
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK353095CRCQ

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK353095CRCQ

UPC00887753252791

UseOVER 500 HP can carry SFI Sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Driveshafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft Quick Change Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Applications3`` CHROME MOLY W/QUICK DISCONNECT THANSMISSION YOKE Can Carry SFI sticker

Price$601.52
Add to Cart
Array
(
    [id] => 340
    [application] => OVER 500 HP can carry SFI Sticker 
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK353095CRCQ
    [price] => 601.52
    [price_backup] => 601.52
    [subcategory] => 2
    [weight] => 32
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/SK-35-30-83CRCQ 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 3`` CHROME MOLY W/QUICK DISCONNECT THANSMISSION YOKE Can Carry SFI sticker
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252791
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Driveshafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft Quick Change Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1473002222
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK35-35-83CR

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK35-35-83CR

UPC00887753252807

UseOver 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Provided Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Applications3.5" CHROMOLY SHAFT 1350 WITH CUSTOMER SUPPLIED TRANSMISSION YOKE YOKE

Price$639.51
Add to Cart
Array
(
    [id] => 341
    [application] => Over 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK35-35-83CR
    [price] => 639.51
    [price_backup] => 639.51
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/IED-SK-35-35-CR 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 3.5" CHROMOLY SHAFT 1350 WITH CUSTOMER SUPPLIED TRANSMISSION YOKE YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252807
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Provided Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1473196204
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK353583CRC

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK353583CRC

UPC00887753252814

UseOVER 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Applications3.5" CHROMOLY SHAFT 1350 WITH YOKE

Price$710.00
Add to Cart
Array
(
    [id] => 342
    [application] => OVER 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK353583CRC
    [price] => 710.00
    [price_backup] => 710.00
    [subcategory] => 2
    [weight] => 32
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 3.5" CHROMOLY SHAFT 1350 WITH YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252814
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1473196240
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-95CR

Online Store

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95CR

UseOVER 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and CUstomer Supplied Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/CUSTOMER SUPPLIED TRANS YOKE

Price$0.00
Add to Cart
Array
(
    [id] => 343
    [application] => OVER 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => SK-35-30-95CR
    [price] => 0.00
    [price_backup] => 0.00
    [subcategory] => 2
    [weight] => 0
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/SK-35-30-83CR 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => CUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/CUSTOMER SUPPLIED TRANS YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and CUstomer Supplied Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1473183013
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

Driveshafts: The Critical Link

Your driveshaft contains every bit of the power your engine produces. In low gear it delivers engine torque multiplied many times. In high gear it delivers engine torque and the peak horsepower while turning at the same RPM as the engine. To enjoy smooth, safe operation, this critical link deserves every owner's serious attention.

A 90 Second Overview

Watch a 108 second overview of products we offer at Inland Empire Driveline.

SFI Foundation SAE International Hot Rod Industry Alliance SDC Platinum
Inland Empire Driveline Service, Inc. BBB Business Review
Call IEDLS Toll Free: 800.800.0109

Inland Empire Driveline Service, Inc.
4035 East Guasti Rd., Ste 301
Ontario, CA 91761
909.390.3030

Inland Empire Driveline Service, Inc.
1540 Commerce St., Ste A
Corona, CA 92880
951.279.8026