Items in Your Cart = 0
1958 - 1964 Chevrolet Cars
Super Strength Bearing Support
Everyone who has ever had a 1958 to 1964 Chevrolet knows the cars have a weak center support. While this design was adequate for the 265 V-8 it isn't up to the torque put out by current engines.
Our "Super Strength" Bearing support is manufactured from 7075-T6 Aluminum and is designed to withstand the stress of maximum horsepower drive powertrains. The Polyurethane cushion can absorb the shock of high torque acceleration and helps to smoothly deliver the power under extreme conditions. This support is designed to be used with a telescoping rear shaft section as shown below.
|Style||Part #||Applications||Description||Price||Purchase Part|
|IE210527xs||Pedestal Style||1958-64 Chevrolet Cars Recommended for use with telescoping rear shaft section.||$133.00|
|58-64RS||Rear Shaft Kit||An "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It comes with the 7075-T6 Aluminum Bearing Support. The Rear Shaft Kit can be special order for trucks.||$330.00|
|IE502||Upgraded Shaft Kit 502 Preformer Kit||These shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks. This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-^ Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.||$717.00|
|58-64LR||58-64 Chevy and 58 to 72 Chevy and GMC Trucks||This "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.||$630.00|